SIRIUS PRO C - Professional Technology Line In Cabinet For Self Service Centres

The SIRIUS PRO C line starts from a minimum configuration of 2 washing tracks, with a standard frame size of 2700 x 800 x 2100 mm, to reach normally up to 4 tracks.
Beyond the 4 tracks, or for a particular number of optionals, two frame groups must be used.

Models:

• SIRIUS PRO C 1 + 1: serving 1 wash bay and an external one for van use.
• SIRIUS PRO C 2: serving 2 wash bays
• SIRIUS PRO C 2 + 1: serving 2 washing bays and an external one for van use
• SIRIUS PRO C 3: serving 3 wash bays
• SIRIUS PRO C 2 + 2: serving 2 wash bay and 2 other external for van use
• SIRIUS PRO C 3 + 1: serving 3 wash bays and an external one for van use
• SIRIUS PRO C 4: serving 4 wash bays
• SIRIUS PRO C 4 + 1: serving 4 wash bays and an external one for van use
• SIRIUS PRO C 3 + 2: serving 3 wash bays and 2 other external bays for van use
• SIRIUS PRO C 5: serving 4 wash bays
• SIRIUS PRO C 5 + 1: serving 5 wash bays and an external one for van use
• SIRIUS PRO C 6: serving 6 wash bays
• SIRIUS PRO C 6 + 1: serving 6 wash bays and an external one for van use
• SIRIUS PRO C 7: serving 7 wash bays
• SIRIUS PRO C 6 + 2: serving 6 wash bays and 2 other external bays for van use
• SIRIUS PRO C 8: serving 8 wash bays

 Main Features

• Tubular structure with stainless steel profiles and doors
• 4 kW electric motors with elastic coupling transmission
• 15 l/min HAWK pumps
• Switchboard with PLC, can also be equipped with inverter (optional)
• Operator panel for operation and program management
• Editable work time management. Possible to vary them for each work program
• Control of the management of the different incoming waters
• Electric dosing pumps for chemical products
• Inlet water treatment kit - SOFTener + OSMOSIS
• Stainless steel, brass and polypropylene fittings
• Maximum of 10 Washing PROGRAMS (choice from those listed below):
  1 - WHEEL WASH
  2 - ACTIVE FOAM
  3 - BRUSH
  4 - PRE-SOAK
  5 - WASHING
  6 - WAX
  7 - POLISH
  8 - RINSING WITH OSMOSIS
  9 - AVAILABLE FOR CUSTOMIZATION
  10 - AVAILABLE FOR CUSTOMIZATION

On Demand:

• Hot water kit with gas or oil boiler or with electric boiler
• Hot water on wash program or on pre-wash program, with or without brush
• Stainless steel push-button panel with or without pedestal alternatively on board the machine
• Stainless steel pneumatic valves on circuits with chemicals

For any requirements different from the standard models here mentioned, please do not hesitate to contact us. We will do our best to find a solution suiting your needs.